Solar Modules and Inverters are the main components of a solar power system and the constitute 70% of the project cost.
A solar plant typically meets 20%-26% of your total energy requirement. However, this depends on the space available to set up the plant.
PV, short for Photovoltaic, derives its name from the process of converting light ('photo') directly into electricity (‘voltaic’). Simply put, a Solar PV system is a power station that generates electricity from sunlight.
The main components of a Solar PV system are:
Solar Panels/Modules: Solar panels consist of a group of small cells made from semiconductor material. When the sun’s light falls on the modules, it excites the electrons, thereby creating direct current (DC).
Storage Battery: The best use of solar energy is to consume it while it is being generated. If the requirement is to store this power and consume it in the non-sunny hours, then solar energy can be stored in batteries for later consumption
Solar Inverter: The DC electricity goes into an inverter that converts it into alternating current (AC). We use AC for running our household or office or factory equipment.
If you planning to install a solar plant, below are some things to consider:
There are two main models:
OPEX Model – In this, the investor owns the asset (Plant). The consumer and the producer enters a PPA (power purchase agreement) for a decided duration of time which is typically 15-25 years. During the tenure of PPA, the consumer pays the producer for the power generated at a decided tariff. After the PPA terminates, the asset is transferred to the consumer.
CAPEX model – In this, end consumer owns the asset (Plant) and can claim accelerated depreciation.
The Solar plant will generate electricity only during the Sunny hours, typically between 6 A.M. to 6 P.M and will not generate any electricity during the night. You must source electricity from Grid or the DG set during the night time.
There are various factors involved in choosing your PV system. You might want to research on them before choosing the apt model:
If your roof is not having any shade from any adjacent buildings, trees etc. and its structure is not delicate then your roof is suitable for solar plant. Solar plant can also be installed on car parks, open shade ground within your premises by erecting special mounting structures.
Net Metering allows you to sell excess solar power back to the grid and thus results in maximizing the savings of the solar project.
The plant will generate electricity only during the day time so during the night the electricity has to be sourced from the Grid. Secondly, solar electricity will meet only a part of your total electricity requirement, the remainder of which has to be met from the Grid.
Below are the approximate costs for a 100KW set up:
Solar power is much cheaper than power from diesel generators. Today average power from solar is Rs. 5-7 per KWh (Fro commercial and Industrial segments) while average power from diesel generator is Rs. 17 per kWh (a litre of diesel generates around 3-4 kWh).
It can range between 2-10 weeks depending on the complexity of the project.
No permissions are required if you are installing an off-grid solar PV system. But in case you wish to integrate your solar system with grid to avail net metering option, certain permissions are required to be taken from the discoms
This would depend on various factors such as shading free rea available, direction of the roof etc, however as a thumb rule, the following could be a good approximate: 1KW plant requires 12 sq mtrs of shade free area.
On an average, every 1 KW setup produces 1300 to 1500 units in a year. This may however vary based upon the location of the plant, seasonal factors, surroundings and shadow free areas. You can consider 1400 units for sake of calculations.
Solar Power is an intermittent source of energy depending on irradiation, temperature and a lot of other environmental features. Hence, 100 kW plant won’t produce 100 kW power.
Most panel manufacturers give warranty of 25 years, however there have been plants in operations for 40 years as well
The Maintenance is not significant. Water can be used to clean the panels – Typically 5 litres of water is required for a KWh.
The electricity generation of the plant suffers during Rainy and cloudy days especially during the Monsoon season, but the generation never drops to zero. The loss of generation during monsoon and other rains is already adjusted in the 1.3 to 1.5 Lakhs unit/100kWp/annum generation number.
It is advisable to install a data monitoring device along with your solar device that will allow you to compare the actual with the estimated performance on daily, monthly and annual basis.
Solar energy is integrated into the LT panel of consumer premises, wherein DG, Grid or other generator source would be feeding power as of now. When solar energy is injected, the equipment is unaware of the source from which power is feeding in. Hence it is not possible to segregate the loads on basis of power source.
In case the grid fails, the solar power must be fully utilized or stopped immediately feeding to the grid so as to safe-guard any grid person/ technician from getting electrocuted while working on the grid for maintenance etc. This feature is called "Islanding Protection".
Sunshade Energy Pvt. Lmt. Solar is a dedicated distributed (rooftop) solar power developer catering to industrial and commercial clients.
Sunshade Energy Pvt. Lmt. works on OPEX model or RESCO model:
Listed below are core strengths of Sunshade Energy Pvt. Lmt.. This makes Sunshade Energy Pvt. Lmt. stand out among its counterpart:
Generally, the asset is transferred to the client at nominal value. However, this will vary depending on the final commercial agreement between the client and Sunshade Energy Pvt. Lmt..
Sunshade Energy Pvt. Lmt. sells the Solar electricity at a price ("Solar Tariff") which is lesser than your current cost of power from Distribution company and Diesel Generator Backup set. With no startup Capital investment from you, systems start paying for itself immediately and as the gap between solar tariff and the Distribution company power cost increase over the years; the savings also increase.
To install solar power systems on Individual residual rooftops, one must consider the following:
Usually the capacity of a plant for residential usage comes to less than 50 KW.
Sunshade Energy Pvt. Lmt. does not cater to smaller plant sizes as RESCO model is not commercially viable. However, there are other EPC players who do cater to this segment. To learn more about this, you can visit :
Sunshade Energy Pvt. Lmt. has developed a proprietary client selection model and undertake the comprehensive analysis for entering contractual arrangement with any client. The Client selection model broadly comprises analysis on
Solar plants by Sunshade Energy Pvt. Lmt. are suitable for Business and Domestic establishments alike. We have clients ranging from Industries, Educational Institutes, Hotels, Hospitals, Malls who have adopted rooftop solar solution.
Yes. Sunshade Energy Pvt. Lmt. can structure the tenure of PPA and tariff as per requirement of customer. The Solar tariff can be flat over the tenure or escalating or combination of flat & escalating or any other customized tariff stream.
Sunshade Energy Pvt. Lmt. at its own cost takes the complete responsibility of taking all the necessary regulatory approvals and permits required for the operation of the solar plant.
Yes. Sunshade Energy Pvt. Lmt. obtain all necessary insurance policy which meets the prudent framework of project insurance. Sunshade Energy Pvt. Lmt. avails comprehensive construction Insurance and Operations Insurance. Sunshade Energy Pvt. Lmt. complies with all statutory requirements including workman compensation policy. Additionally, Sunshade Energy Pvt. Lmt. takes insurance of significant sum insured towards third party liability.
Projects will be owned by the company "Sunshade Energy Pvt. Lmt. Solar" for the tenure of the project.
Our Installation size typically start from around 100 -200 KW.
A proper evaluation will be done by Sunshade Energy Pvt. Lmt. to see if solar project can be put up on your premises.
Sunshade Energy Pvt. Lmt. uses non-penetrating structures which are mounted without any puncturing. Thus, the integrity of roof is maintained. The load of the entire solar plant is about 10-15 kg/square meter and can easily be taken by any roof.
No, the system offered by Sunshade Energy Pvt. Lmt. does not have any battery so the electricity which is generated by the plant should be consumed simultaneously. Since the electricity is not stored, the plant cannot be used as a battery backup.
Sunshade Energy Pvt. Lmt. offers a Grid Interactive Rooftop Solar plant which matches the frequency and voltage of your Grid and Diesel Generator and runs in sync with them. The electricity created by the solar plant is exactly like the one you are sourcing from Grid/DG and it will be fed in simultaneously with them. Thus, there will be no voltage fluctuations and you can use/connect any number of heavy loads equipment.
Below are the basic requirements Sunshade Energy Pvt. Lmt. needs to assess the generation capacity based on availability of space and load demand:
You can write a mail to Sunshade Energy Pvt. Lmt. with all the supporting documents mentioned below.
Sales support: (+91) 07500502200